sulpslug.info

All Park Tool chain tools have replaceable pins. The CT 2 and CT 3 use a chrome colored pin approximately 22mm long, and the CT 5 uses a black shorter pin about 18mm long. The MTB 1 has a special pin as well.

These pins fit Park Tool's CT 1, CT 2, CT 3, CT 5 and CT 7nbspAll Park Tool chain tools have replaceable pins. The CT 2 and CT 3 use a chrome colored pin approximately 22mm long, and the CT 5 uses a black shorter pin about 18mm long. The MTB 1 has a

Park Tool CTP Replacement Tool Pin. Designed to fit Park Tool's CT 1, CT 2, CT 3, and CT 7 chain tools, have the CTP Replacement Tool Pin on hand in case you need one.

The Park Tools SPA 6 Adjustable Spanner uses hardened, replaceable pins and is designed for heavy duty use, the distance between the pins is adjustable, allowing use on virtually all hanger cups using pin holes Pin Diameter 2.2mm

Park Tool SPA 2 Red Pin Spanner. Park Tool's SPA 2 Spanner fits one key release retaining rings on Shimano and Campagnolo cranksets and the adjusting cone on most freewheel clusters.

Park Tool SPA 1 Green Pin Spanner. The Park Tool SPA 1 Green Pin Spanner fits adjusting cups on many adjustable type bottom brackets.

The green handled SPA 1 fits adjusting cup on many adjustable type bottom brackets. The pin ends are round with a diameter of 2.9mm. Park Tool Pin Spanners have been designed to give maximum usefulness and versatility at the lowest possible cost. Tou

Crank dustcap pin tool, with chainring nut tool on the other end.

Replacement Yakima pin wire lock for use with Yakima brand racks.

Yakima replacement hitch bolt and pin.

Yeti Cycles PN 300030087, 1.38 steel pin.

AQUAVAC HANDLE PIN AV7806